Pelco DX7000 Series DVR User Manual


 
12 C665M-C (5/03)
SCHEDULE SETUP
The default recording schedule for the DX7000 is to continuously record all enabled cameras twenty-four hours a day, seven
days a week. Pelco recommends clearing the default setting before programming a schedule. To clear the default setting click
the CLEAR ALL SCHEDULE button.
Twenty-four group schedules can be programmed to include the following:
Cameras to record
Day and time to record
Recording method (continuously, motion, and/or sensor detection)
Evaluate the flow of motion at the surveillance site before programming a group schedule using one of the following recording
methods:
Continuous – Continuous recording is recommended for surveillance areas with a lot of movement.
Motion – Saves disk space; records only when motion is detected.
Sensor – Saves disk space; records only when an alarm is activated.
Figure 4. Schedule Setup Menu
1 SCHEDULE (GROUP 01-24) – Use the drop down menu or arrow buttons located to
the right of the GROUP window to select a group.
5
8
9
123
4
6
7