Filter
Top Products
118 C626M-C (5/06)
Linking Relay Outputs to Alarm Events
To set relay outputs to activate in response to an alarm event:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the Alarm Link Settings section, do the following:
a. Select an alarm channel from the Alarm Channel drop-down box.
b. Click the button for each relay you want to link to the selected alarm.
You can also drag relays onto alarms in the Site tree while in Live mode (main screen).
5. Click Apply.
Figure 90. Event-Relay Link Settings: Alarm Link Settings Section
Linking Relay Outputs to ATM/POS Events
To set relay outputs to activate in response to an ATM/POS event:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the ATM/POS Link Settings section, do the following:
a. Select an ATM/POS address from the ATM/POS Address drop-down box.
b. Click the button for each relay you want to link to the selected ATM/POS address.
You can also drag relays onto ATM/POS devices in the Site tree while in Live mode (main screen).
5. Click Apply.
Figure 91. Event-Relay Link Settings: ATM/POS Link Settings Section
4
b
4a
4
b
4a