A SERVICE OF

logo

24 C1606M (6/04)
Install Software on the New Drive
To complete the installation of a new primary hard disk in your DX8000, all necessary operating system and application
software must be installed. Installation of this software will require that you configure the DX8000 to boot from the
CD/DVD drive. Then follow the on-screen directions to prepare the new hard disk drive for service in your DVR.
CONFIGURE SYSTEM TO BOOT FROM CD/DVD
To change the boot drive from the hard disk to the CD/DVD drive:
1. Insert the DX8000 Reinstallation CD into your DVR’s CD/DVD drive.
2. Boot the DX8000 Series DVR by turning on the power switch, or restart the system if it is already running. Refer to
the Operations and Programming Manual for instructions on restarting the DX8000.