Filter
Top Products
C626M-C (5/06) 21
Figure 12. Server Information Dialog Box
ADDING A SITE WITH AN UNKNOWN IP ADDRESS
This section describes how to add a site with an unknown IP address. To be successful, the following stipulations must be satisfied:
• Each DVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.
NOTE: The DX8000 scan process running on the PC takes much longer than the scan process does running on the DX8000 server.
To add a remote DVR site to the Connection List when you do not know the IP address of the site:
1. On the DX8000 toolbar, click . The Connection List dialog box opens.
2. Click DX8000 Scan. The DX8000 Scan dialog box opens.
3. Enter an IP address range to search for DVR sites.
a. Enter the first three octets of the IP range you wish to search; for example, 10.10.1.
b. Enter the beginning value for the search range in the fourth octet; for example, 001.
c. Enter the final value for the search range in the text box provided; for example, 254. Each octet of the IP address must be an integer
between 1 and 255.
4. Click Find.
5. Select one or more DX8000 servers to add to the Site tree.
6. Click Add. The site appears in the Connection List.
7. Click OK when you return to the Connection List dialog box.
Figure 13. DX8000 Scan Dialog Box
ᕣ
ᕤ
ᕥ
ᕦ
ᕧ
ᕥ
ᕦ
ᕤ
3a 3b 3c