Filter
Top Products
C626M-C (5/06) 163
7. Configure the server event transmission time. For information on setting the duration and transmission interval, refer to Setting Server
Event Transmission Time on page 224.
SETTING SERVER EVENT TRANSMISSION TIME
After clients have been added and linked to cameras, you must set the amount of time a server sends images after an event occurs and the
interval between sending each image. Set the duration for sending images and the transmission interval after clients have been added and
cameras are linked to one or more clients. For information on adding clients, refer to Adding Client Emergency Agents to be Notified on page 222.
For information on linking cameras, refer to Linking Cameras to Client Emergency Agents on page 223.
To set the duration for sending images and the transmission interval:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. In the Option section of the Emergency Agent page, enter the amount of time in seconds that you want the DX8000 to continue sending still
images after an alarm, motion, or video loss event has been detected.
4. Enter the time interval in seconds that you want the DX8000 to wait between sending each still image.
5. Click Apply.