Filter
Top Products
168 C626M-C (5/06)
Sending E-Mail Notifications In Response to Motion Events
E-mail notifications can be sent whenever a camera attached to a DX8000 detects motion.
To cause e-mail notifications to be sent in response to motion events:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is display.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Notification Items section, do the following:
a. Click the Motion check box.
b. Click once in the Selected Channels field to the right of the word Motion. The Selected Channels dialog box opens.
c. Do one of the following:
• Click the check box of each channel you want to monitor for motion detection events.
• Click Select All to monitor all channels for motion detection.
• Click Deselect All to deselect all channels.
5. Click OK.
6. Click Apply.
Sending E-Mail Notifications In Response to Alarm Events
E-mail notifications can be sent whenever an alarm input is activated.
To cause e-mail notifications to be sent in response to whenever an alarm input is activated:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is display.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Notification Items section, do the following:
a. Click the Alarm check box.
b. Click once in the Selected Channels field to the right of the word Alarm. The Selected Channels dialog box opens.
c. Do one of the following:
• Click the check box of each channel you want to monitor for alarm detection events.
• Click Select All to monitor all channels for alarm detection.
• Click Deselect All to deselect all channels.
5. Click OK.
6. Click Apply.