Filter
Top Products
170 C626M-C (5/06)
Modifying an E-Mail Group Name
To modify a group name:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Mail Group area, do the following:
a. Click Manage Groups. The Group Management dialog box opens.
b. In the Group Name table, select a group.
c. Click Edit Group. The Manage Groups dialog box opens.
d. Edit the existing name or enter a new name for the group.
5. Click OK.
6. Click Close.
7. Click Apply.
Deleting an E-Mail Group
To delete a group:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Mail Group area, do the following:
a. Click Manage Groups. The Group Management dialog box opens.
b. In the Group Name table, select a group.
c. Click Delete.
5. Click Close.
6. Click Apply.
Adding Members to an E-Mail Group
Up to 32 members can be assigned to each e-mail group.
To add e-mail addresses to a group:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. Do the following:
a. In the Mail Group section, select a group name from the drop-down box.
b. Ensure that the group check boxes under To and CC are unchecked.
c. Enter an e-mail address in the To or CC text boxes.
d. Click Add to Group.
5. Click Apply.