Pelco DX8000 DVR User Manual


 
220 C626M-C (5/06)
Adding a DX8000 Server with a Known IP Address to a Group
To add a DX8000 server with a known IP address to a group:
1. Click . The Connection List dialog box opens.
Figure 207. Connection List Dialog Box
2. Do the following:
a. Select a group.
b. Click Add. The Server Information dialog box opens.
Figure 208. Server Information Dialog Box
3. Enter the name of the DX8000 Series DVR you wish to add to the group.
4. Enter the IP address of the DVR.
5. If necessary enter a new base port number (9002 is the default).
Consult your network administrator before assigning or changing port numbers. Make sure that the ports are not blocked internally but are
protected from external threats by a firewall. Web client and server ports must be identical.
6. If necessary, enter a software upgrade port number (9003 is the default).
7. If necessary, in the Information Port box, enter a new information port (9005 is the default).
8. Click OK. The site appears in the Connection List under the group name.