Filter
Top Products
58 C626M-C (5/06)
Accessing a Remote Camera Programming Menu
The DX8000 allows you to navigate the remote camera menu system using any of the following:
• PTZ OSD Menu controls. For information on using the PTZ OSD Menu controls, refer to Using the PTZ OSD Menu Control on page 69.
• Keypad controls. For information on using the keypad controls, refer to Accessing a Remote Camera Programming Menu on page 70.
• Keyboard keys. For information on using the keyboard keys, refer to Using PC Keyboard Shortcuts to Operate PTZ and Lens Functions on
page 63.
The following procedure instructs you to use the PTZ OSD Menu control to navigate the remote camera programming menu.
To access a programming menu for a remote camera:
1. On the DX8000 toolbar, click .
2. Drag a remote camera from the Site tree onto a view panel.
For certain camera models, you can also select preset number 95 from the keypad to access remote setup mode.
3. To access remote camera setup mode, do one of the following:
• On the DX8000 keypad, click from the keypad.
• Click , 9, 5, and from the PTZ keypad.
Figure 41. PTZ Control Panel