Pelco DX8000 DVR User Manual


 
96 C626M-C (5/06)
CREATING BOOKMARKS
To select a region to export:
1. Make sure the DVR is in Playback or Search mode by clicking or .
2. Click if you are in Live mode, or proceed to step 3 if you are in Search mode.
3. Select a camera from the Site tree.
4. Locate the timeline slider at the beginning of the range you want to bookmark.
You can use the drop-down box and spinner buttons above the timeline to locate a bookmark.
5. Click . A red bookmark flag appears on the timeline.
Figure 73. Setting a Starting Bookmark
6. Locate the timeline slider at the end of the range you want to bookmark.
7. Click . The bookmark flag and the region between bookmarks turn gray.
Exporting a bookmarked region of video requires start and end bookmarks. If only one bookmark is set, video will not be marked for export.
8. Repeat steps 4 through 7 for each additional region you want to bookmark for that camera.
9. Click if you are in Live mode, or proceed to step 8 if you are in Search mode.
10. Click and follow the directions in Performing the Export on page 117.
CLEARING BOOKMARKS
This section describes how to clear bookmarks and includes the following topics:
Clearing a Single Bookmark on page 114
Clearing All Bookmarks on page 115
Clearing a Single Bookmark
To clear a single bookmark:
1. Select a bookmark flag from the timeline. The bookmark flag should change to a light green color.
2. Click to remove the selected bookmark.
Figure 74. Removing a Single Bookmark