Filter
Top Products
16
6. Setting remote controller
When controlling several eDVRs with one remote controller, set Remote Contorl ID as follows.
6.1. Setting ID of MD3200M
(1) Press the [MENU] button
(2) Select “System” with using [▶] button and press the [▷] or [▼ ] button
(3) Select “Miscelleaneous” from the sub-menu list using the button[▼ ] and press [▷] button.
(4) Select “Remote Control ID” and press the [▷].
(5) Select a value using the [◀/▶] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 eDVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”.