Filter
Top Products
23
8.3. Setting recording condition
Recording conditions under the “Quick Setup” menu tab apply the same values to all analog channels
1~16. All settings are applied for 24 hours/ day regardless of the value set for “Time Schedule” or “Alarm
Rec.”
(1) Press [MENU] button and select “Quick Setup” when OSD menu is shown.
(2) Move to sub-menu by pressing [▷] or [▼ ] button.
(3) Select “Recording” using the [▲ /▼ ] buttons and press [▷].
8.3.1. Configuration Status
Displays the recording configuration status. When setting through the “Quick Setup” menu, “Quick
Setup” will be shown. When setting up thorugh “Normal Rec,” or “Alarm Rec,” “Custom Setup” will be
shown.
<Note>
Only when normal recording of all channels are same, it is marked as ‘Macro Setup’.