Filter
Top Products
28
<Note>
1. Configuration a sensor is to set On/Off usage and type.
2. Please refer to “Alarm Rec” for saving and “Alarm Act” for relay-out on the “eDVR User’s Guide”
9.2. Connecting & configuring relay out
9.2.1. Specifications
In order to run relay output of eDVR MD3200M normally, the following conditions are required.
Output Ch. 4Ch relay differential outptus
Output type Dry Contact
Spec.
Connecting type Connect the trimmed wire to terminal block
24V DC, 1.25A, 30WDC
125V DC, 0.24A, 30W
125V AC, 0.5A, 62.5VA
정격
AC
250V AC, 0.25A, 62.5VA