Filter
Top Products
52
(1) When power is supplied to MD3200M, “Disk Manager” runs automatically after rebooting. If not,
run it manually in “MenuUtilityDisk Manager”.
(2) There is a HDD that is indicated as “[F] IntA”. Select it.
(3) Select “Action” as “Add”, configure a size of alarm partition, and press “Apply” button. Then [F] is
changed to [R].
(4) Press the [EXIT] button to shut down “Disk Manager”. (If recording schedule is set, MD3200M will
start recording.)
Expending External HDD (When using internal HDD as primary disk)
MD3200M use IEEE1394, eSATA, NVS04 as external storage device interface, and has two ports (Front:
1port , Rear: 1port) of IEEE1394, eSATA, NVS04. MD3200M supports upto 8TB storage.
<Note>
1. Some IEEE1394, eSATA ports may not be recognized by the MD3200M. Before purchasing,
consult the local WEBGATE distributor.
2. External storage should use external power.
3. For connection and setup of IEEE1394, eSATA, NVS04, please refer to the manual of related
device.
Connect IEEE1394 interface cable as follows.