Filter
Top Products
17
The main screen displays the input »
source from DVI or VGA.
The auxiliary screen displays the last »
viewed channel.
5 Press OK or OPTIONS > [Dual View
OFF] to exit dual view.
Note
•
[Dual View] is available only when the TV is
connected to a device, such as a PC, via VGA
or DVI connection.
When in Dual view mode, press
• +/- to
adjust volume in the main screen and press P
+/- or Numeric buttons to switch between
the TV channels in the auxiliary screen.
Use timers
You can set timers to switch the TV on or
switch to standby at a specified time.
Automatically switch the TV to
standby (sleeptimer)
Sleeptimer switches the TV to standby after a
pre-defined period of time.
Tip
You can always switch off your TV earlier or •
reset the sleeptimer during the countdown.
1 Press (Home).
2 Press to select [Setup] >
[Features] > [Sleep timer].
The bar appears. »
3 Press to set the sleep time.
The sleeptimer can be up to 180 »
minutes in steps of five minutes. If
set to zero minutes, the sleeptimer is
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the »
pre-defined period of time.
Note
Only the channels marked with [x] in the • [Pref.
EPG channel] list, appear in the EPG menu.
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
1 Press GUIDE.
2 Press OPTIONS.
The EPG menu appears. »
3 Press to select one of the following
options.
• [Set remind]/ [Clear remind]
• [Change day]
• [Show info]
• [Search by genre]
• [Schedule reminders]
• [Pref. EPG channel]
4 Press OK to enter or activate the option.
5 Press BACK to exit the EPG menu.
Tip
Press • GUIDE to switch between EPG and
channel grid.
Watch TV in dual view
You can use the Dual View feature to display
the TV channels and the input from a device
with VGA or DVI connector (such as a
computer or a satellite box) simultaneously on
your TV.
1 Select VGA or DVI as the source for your
TV input.
2 Press OPTIONS.
3 Press to select [Dual View ON].
4 Press OK to activate dual view.
English
EN