19
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1 Press (Home).
2 Press to select [Setup] >
[Features] > [Parental rating].
A code setup screen appears. »
3 Enter your code using Numeric buttons.
The parental rating menu appears. »
4 Press to select an age rating.
5 Press OK to confirm.
6 Press (Home) to exit.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-
T digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
Enable subtitles on analogue TV
channels
1 Select an analogue TV channel.
2 Press MHEG/TELETEXT.
3 Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4 Press MHEG/TELETEXT to switch off
teletext.
5 Press SUBTITLE.
The » [Subtitle mode] menu appears.
6 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7 Press OK to enable subtitles.
8 Repeat this procedure to enable subtitles
on each analogue channel.
Lock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press to select a channel to lock.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Lock channel] and
press OK to enter.
You are prompted to enter your »
current code (only at first selection).
5 Enter your code and press OK.
6 Repeat the steps to lock more channels.
Note
Restart the TV for the change to take effect. •
Unlock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press to select a locked channel to
unlock.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Unlock channel] and
press OK.
You are prompted for your current »
code (only at first selection).
5 Enter your code and press OK.
6 Repeat the process to unlock more
channels.
Note
Restart the TV for the change to take effect. •
If you press • P +/- on your remote control to
switch between channels, the locked channels
are skipped.
If you access the locked channels from the
•
channel grid, you are prompted for your
current code.
English
EN