Filter
Top Products
37
• [TV speakers]Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theatre
system is detected.
• [Dev. root menu]Accesses the root
menu of the CD/DVD/game disc.
• [Device setup menu]Accesses the
main menu of the connected device
such as DVD player, HDD recorder,
or game console.
• [Dev. content menu]Accesses the
content menu of the CD/DVD/game
disc.
4 Press OK to enter or activate your
selection.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Enable or disable remote control
pass-through
1 Enable one-touch play and one-touch
standby between easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 35).
2 Press (Home).
3 Press to select a device with
HDMI connector from your home menu.
4 Press OPTIONS.
5 Press to select [Enable RC pass-
through] and press OK.
RC pass-through is enabled on the »
selected device with HDMI connector.
6 Repeat the steps 1 to 5 to disable remote
control pass-through.
Note
Easylink compliant device must be connected •
to the TV via HDMI connector.
Access menu after enabling RC pass-
through
1 Enable remote control pass-through by
following the instructions in the previous
section (see ‘Enable or disable remote
control pass-through’ on page 37).
2 Press to select a device that has
been enabled to support RC pass-
through and press OK to enter.
3 Press OPTIONS to access one of the
following menus for TV or the active
device connected to the TV:
• [TV setup]Accesses menus that
allow you to change picture, sound
and other TV settings.
• [Clock]Displays the clock on the TV
screen.
English
EN