Philips 26HFL5561V/27 Flat Panel Television User Manual


 
17
13 Configure different settings
1 EnterthePhilipsHospitalitysetupmenu.
2 Press toselectCONFIGURATION.
3 Press toselectoneoftheavailableoptionstocongurethe
settings:
• SWITCH ON / OSD:Toconguresettingssuchasvolume,
channel,pictureformat,powermode,etcthatareusedas
defaultwhentheTVisswitchedon.
• PICTURE / SOUND:Tocongurepictureandsoundsettings
suchasbrightness,color,sharpness,tint,bass,balance,AVL,etc.
• SECURITY:Tosetthelevelofsecurity.Toenablekeyboardand
RClock,Pro:IdiomdecryptionandSmartSecure.
• CONTROL:Toconguresettingsforchannels,minimumand
maximumvolume,ESP,etc.
• SMARTFEATURES:ToconguretheSmartPower,USB
break-in,SmartGuideCategory,SmartUpdate,andsoftware
downloadsettings.
• AUDIO FEATURES:Tocongurethecorrectaudiosource.
• CC/ V-CHIP:TocongureclosedcaptionandV-Chipsettings.
• HOTEL INFORMATION:Tocongurethehotelinformation
includinghotelnameandroomnumber(requiredinformation
whenSmartSecureisenabled).
Congure the SmartFeatures
1 EnterthePhilipsHospitalitysetupmenu.
2 Press toselectCONFIGURATION > SMARTFEATURES.
PICTURE / SOUND >
CONTROL
>
SMARTFEATURES
AUDIO FEATURES
CONFIGURATION
SECURITY
>
SWITCH ON / OSD
>
>
CC / V-CHIP
>
HOTEL INFORMATION
>
HDMI CEC
>
>
LOW POWER STANDBY
SMARTFEATURES
SMARTPOWER
OFF
NO
SMARTCP
YES
USB BREAK-IN
SW DOWNLOAD
NO
SMARTUPDATE
YES
SMARTUPDATE CHANNEL
87
>
SMARTGUIDE CATEGORIES
>
SMARTSECURE
>
3 Press toselectoneofthefollowingoptions:
• ESP (Energy saving programmability):Setatimefrom1-99
hourstoenableESP.IftheTVdoesnotreceiveanycommand
forthistimeperiod,itentersthestandbymodetosaveenergy.
SelectOFFtodisableESP.
• DIGIT TIMEOUT:Setatimebetween1-9.9seconds.When
youpressakeyonyourRC,theTVwillwaitforthespecied
timebeforeassumingthatyouarenishedenteringdigits,and
switchingtotheenteredchannel.Thedefaulttimeisthree
seconds.Ifyouwanttokeyintwo-digitorthree-digitchannel
numbers,donotselectthetimetobetooshort.
• 3 DIGIT ENTRY:SelectYEStoenabletheselectionofthree
digitchannelnumber(channelnumbers1-250forcable
modeand2-250forantennamode).SelectNOtoenablethe
selectionofonlytwo-digitchannelnumbers(channelnumbers
1-99forcablemodeand2-99forantennamode).
• SOURCE MENU ITEM:SelectYEStoallowtheguesttoselect
asourcefromtheguestmenuusingtheguestRC.Otherwise,
selectNO.
• PIC FMT MENU ITEM: SelectYEStoallowtheguesttoselect
apictureformatfromtheguestmenuusingusingtheguestRC.
Otherwise,selectNO.
• SMART WINDOW MENU ITEM:SelectYEStoallow
thegueststowatchinputsfromaPCandanRFchannel
simultaneously,onasplitscreen.Otherwise,selectNO.
• SMART GUIDE:SelectYEStodisplaytheon-screenchannel
guide.ThechannelguideisnotusedwithPay-Per-Viewsystems
andshouldbesettoNO.
• MIN VOLUME:Settheminimumvolume.
• MAX VOLUME:Setthemaximumvolume.
• LODGENET CARD:SelectYEStoallowtheuseofLodgenet.
Note
TheSMART GUIDEwillshowonlythoseprogramsthathavebeen
assignedtoone(ormore)categories.
English
EN