Filter
Top Products
12
Set the type of
communication
You must set the correct communication
protocol to work with an external system.
1 Enter the setup menu.
2 Press to select [COMMUNICATION].
3 Press to select the type of
communication:
[COMMUNICATION]: Select one of the
following:
[SP-SPI], [SP-I2C], [HM-LINK]
or [SERIAL XPRESS]: Sets the
communication protocol between
the TV and an external device
connected to the TV, such as a set-
top box.
[SMART RC]: Accesses PayTV
channels using remote control.
[OFF]: Allows no communication.
[STORE]: Stores the settings. Select this
option after making all the selections.
[ENABLE CARD SLOT]: Select [YES] to
enable the smart card slot.
[DCM TYPE]: Select [GENERIC] if you
use [SP-SPI] or [SP-I2C] protocol. Select
[NO SOURCE SWITCH]iftheset-top
box requires no switching.
[CP]: Select [YES] to control the panel in
system mode.
•
•
•
•
•
•
•
•
STORE
ENABLE CARD SLOT
YES
COMMUNICATION
SP-SPI
>
DCM TYPE
CP
GENERIC
YES
COMMUNICATION
STORE
ENABLE CARD SLOT
YES
COMMUNICATION
SP-SPI
>
DCM TYPE
CP
GENERIC
YES
COMMUNICATION
1 Switch on the TV and select a TV
channel.
2 Press ‘319753’ followed by (Mute)
within 10 seconds.
The setup menu is displayed.
Navigate the setup menu
To navigate the setup menu,
Press on the remote control to select
a menu.
Press tocongureormodifythe
settings of the selected function.
Press M on the PBS setup remote control
or MENU on the guest remote control to
return to the previous menu.
Select a language
Youcanchoosealanguagefortheon-screen
display on your TV.
1 Enter the setup menu.
2 Press to select a language.
The setup menu is displayed in the
selected language.
Note
You can choose [ENGLISH], [FRANCAIS],
[DEUTSCH], or [ITALIANO] as your
preferred language.
•
Select the country
Select the country where you are installing the
TV.
1 Enter the setup menu.
2 Press to select the country.
»
•
•
•
»
EN