Filter
Top Products
26
3 Press to set the source and type of the
software download:
[SOURCE]: Select [USB] or [RF] as the
source of download.
[SW TYPE]: Select one of the following
types of software for download:
[SSB NVM]: Downloads SSB NVM
software.
[SSB FIRMWARE]: Downloads
digital software such as MPEG 2 and
MPEG 4.
[8051 FIRMWARE]: Downloads the
TV startup data.
[IBOARD NVM]: Downloads the TV
settings.
[IBOARD FIRMWARE]: Downloads
iboard software.
[ALL]: Downloads all the software
upgrades.
[PROGRAM NO.]: Selects the RF
channel to download the software from.
This is available only when you select
RF as the source of download. Press 0-9
(Numeric buttons) to select the channel.
[RF TO TV]: Downloads the software
from an RF channel to the TV. This is
available only when you select RF as the
source of download.
[USB TO TV]: Downloads the software
from a USB storage device to the TV.
This is available only when you select USB
as the source of download. Executes also
via the F button on the setup remote
control.
Note
Do not remove the USB storage device during
cloning.
All standard remote control functions and TV
controls are disabled during cloning.
•
•
•
•
•
•
•
•
•
•
•
•
•
EN