Filter
Top Products
20
or select [NO] to enable the tuning
of double digit channels.
[DIGIT TIMEOUT]: Set a time
between1-9.9secondsfora
channel to switch to another channel.
Do not select [DIGIT TIMEOUT] to
be too short if you want to enable
the tuning of two digit or three digit
channel numbers.
[3-DIGIT TUNING]: Select [YES]
to enable the tuning of three digit
channels. Select [NO] to enable the
tuningofonlytwo-digitchannels.
[AUTO SCART]: Enables or disables
the automatic detection of SCART
signal (see ‘Automatic detection of
SCART signal’ on page 20).
[ALWAYS RGB]: Enables or disables
RGB insertion (see ‘Insert RGB’ on
page 21).
[RING MAX]: Sets the maximum
number of rings.
[CEC]: Enables or disables HDMI
CEC features such as one touch play,
system standby and RC passthrough.
Automatic detection of SCART signal
1 Enter the setup menu.
2 Press to select [CONFIGURATION]
> [CONTROL] > [AUTO SCART].
3 Press to select one of the
following options:
[AV1]: Switches to AV1 automatically
when a SCART cable is connected to
the AV1 (EXT 1) connector.
[AV2]: Switches to AV2 automatically
when a SCART cable is connected to
the AV2 (EXT 2) connector.
[ALL]: Switches to the correct
source when a SCART signal is
detected on any connector.
[POWER SCART]: Wakes up the
TV automatically from standby when
a SCART signal is detected. Switches
•
•
•
•
•
•
•
•
•
•
[TUNER]: Sends the audio/ video
output from the tuner to another TV
that is connected to your TV.
[MONITOR]: Sends the audio/ video
output from a monitor to another
TV that is connected to your TV.
This is not available when input signal
is protected with Vsecure, HDCP
and Macrovision.
[MUTE]: Disables the audio/ video
output from all the sources.
Congurethecontrol
options
1 Enter the setup menu.
2 Press to select [CONFIGURATION]
> [CONTROL].
3 Press to select one of the
following options:
[AUDIO / VIDEO MUTE]: Select
[YES] to mute the source audio and
video.
[SCRAMBLED CHANNEL]: Select
[YES] to install the scrambled
channels during automatic
installation or [NO] to skip the
scrambled channels during automatic
installation.
[STEP TUNING]: Select [YES] to
enable tuning of single digit channels
•
•
•
•
•
•
SCRAMBLED CHANNEL YES
DIGIT TIMEOUT
3-DIGIT TUNING
AUTO SCART
CONTROL
STEP TUNING
AUDIO / VIDEO MUTE
YES
0.0
ALWAYS RGB
RING MAX
CEC
AUTO
15
>
YES
YES
YES
SCRAMBLED CHANNEL YES
DIGIT TIMEOUT
3-DIGIT TUNING
AUTO SCART
CONTROL
STEP TUNING
AUDIO / VIDEO MUTE
YES
0.0
ALWAYS RGB
RING MAX
CEC
AUTO
15
>
YES
YES
YES
EN