Filter
Top Products
17
Display the channel banner
1 Enter the setup menu.
2 Press to select [CONFIGURATION]
> [SWITCH ON / OSD] > [CHANNEL
BANNER].
3 Press to select one of the following:
[YES]: Displays the channel banner
on the screen.
[NO]: Prevents the display of the
channel banner on the screen.
Select the preferred audio and
subtitle language
1 Enter the setup menu.
2 Press to select
[CONFIGURATION] > [SWITCH ON /
OSD] > [AUDIO / SUBTITLE].
3 Press to set the audio and subtitle
language:
[AUDIO LANGUAGE]: Sets the
audio language.
[SUBTITLE LANGUAGE]: Sets the
subtitle language.
Note
The default language will be selected each time
the TV is tuned to a new channel.
The preferred language selected in Guest
Menu will override the language selected in
Setup menu until the TV restarts.
•
•
Set ThemeTV
1 Enter the setup menu.
2 Press to select
[CONFIGURATION] > [SWITCH ON /
OSD] > [THEME TV].
3 Press to select one of the following:
[ON]: Displays ThemeTV when you
press OK.
[OFF]: Prevents the display of
ThemeTV.
•
•
•
•
•
•
2 Press to select [CONFIGURATION]
> [SWITCH ON / OSD] > [POWER
ON].
3 Press to select the power mode that is
used when the TV is turned on from the
AC mains power outlet:
[LAST STATUS]: Turns on the TV in
the last used power mode.
[ON]: Turns on the TV. The
button on the TV and the guest
remote control are enabled.
[STANDBY]: Turns on the TV in
standby mode.
[FORCED ON]: Turns on the TV.
The button on the TV and the
guest remote control are disabled.
Enable or disable the volume
indicator
1 Enter the setup menu.
2 Press to select [CONFIGURATION]
> [SWITCH ON / OSD] > [VOLUME
INDICATOR].
3 Press to select one of the following:
[YES]: Displays the volume indicator.
[NO]: Prevents the display of the
volume indicator.
Set the channel display
1 Enter the setup menu.
2 Press to select [CONFIGURATION]
> [SWITCH ON / OSD] > [CHANNEL
DISPLAY].
3 Press to set the format of channel
display:
[NUMBER]: Displays the channel
number on the screen.
[LABEL]: Displays the channel name
on the screen.
[ALL]: Displays both channel number
and the name on the screen.
[NONE]: Prevents the display of
channel information.
•
•
•
•
•
•
•
•
•
•
English
EN