Filter
Top Products
EN-26
Connecting a VCR or DVD Re-
corder
Connecting with a Eurocable
As shown in the fi gure below, con-
nect aerial cables 1 and 2, and connect
Eurocable 3.
Press the key on the remote con-
trol display Source list.
Press the ï key repeatedly to select
EXT2 and press the Æ / key to
confirm your selection.
1
3
2
Recorder
Rear of TV
Bottom of TV
Cable
Connecting with an aerial cable
As shown in the fi gure below, connect aerial
cables 1 and 2.
Tune in the recorder’s test signal and
store the test signal in programme
number 0.
For information, see Manual Store on
page 10 and the user manual of your
recorder.
1.
2.
3.
1.
1
2
Bottom of TV
Recorder
Cable
Connecting a decoder and a VCR
As shown in the fi gure below, connect
a Eurocable to your decoder and to the
euroconnector port of your recorder.
For information, see the user manual of
your recorder.
Alternately, you can connect your de-
coder directly to EXT1 or EXT2 with a
Eurocable.
Warning: Do not place the recorder too
close to the TV because some recorders are
susceptible to signals from the display. Place
the recorder at least half a meter away from
the screen.
Recorder
Decoder
1.