Filter
Top Products
EN-32
Symptom Possible solutions
TV not respond-
ing to the remote
control
Move closer to the receiver at the front of the TV screen
Check the +/- direction of the batteries in the remote control
Change the batteries in the remote control
•
•
•
One or a few
tiny spots on
the screen that
do not change
colour along with
the video picture
This symptom is not a problem. The liquid crystal panel is built with
very high precision technology giving you the fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a
fixed point of red, blue, green or black.
This does not affect the performance of the set.
•
•
Intermittent or
flickering picture
in HD mode
Noise is displayed if the digital equipment fails. Digital equipment can
include a DVD player or set-top box. Check the user manual of the
digital equipment you are connecting.
Use a standard-compliant (high-quality) HDMI to DVI cable.
•
•
No sound or pic-
ture but the red
light on the front
panel is on
Press the
key on the remote control.
•
PC modes do not
work
Check whether connections are correct. (See page 29.)
Check whether the source is correctly selected by pressing the
button to enter the source list and selecting the correct
source.
Check whether you have configured the computer to a compatible
display resolution
Check the graphic card setting of the PC.
•
•
•
•
S-Video colour
becomes faint
Check whether the SVHS cable is properly connected.
Press the P + key on the remote control to do a channel up, and
then press the P – key to do a channel down.
•
•
Black bar on the
top and bottom
of the screen in
PC mode
Change the PC refresh rate to 60 Hz.•