EN-28
Connecting a DVD player, cable
box or game console
Connecting With an HDMI Connector
As shown in the figure below, connect
your equipment with the HDMI connec-
tor.
Press the key on the remote con-
trol. The source list is displayed.
Press the ï key to select HDMI1 or
HDMI2 and press the Æ / key to
confirm your selection.
Connect a DVD player, satellite
receiver or cable box
Connecting With Component Video
Connectors
As shown in the following figure, connect
the three separate component
video cables (1) to the YPbPr jacks on
the DVD player and to the Y (yellow),
Pb (blue) and Pr (red) jacks of EXT4 on
the TV.
Connect the audio cable to the DVD’s
audio L and R jacks and to the L/R
AUDIO jack of EXT4 (2).
1.
2.
3.
1.
2.
Press the key on the remote con-
trol. The source list is displayed.
Press the ï key to select EXT4 and
press the Æ / key to confirm your
selection.
1
2
Bottom of TV
As shown in the following figure, if you
are using a cable box and/or a satellite
receiver, also connect the cable TV cable
and/or the satellite aerial cable (3) to the
aerial cable (4).
1
2
3
4
Bottom of TV
Cable
3.
4.
5.