Filter
Top Products
EN-30
Connecting a camera, camcorder or
game console
As shown in the figure below, connect
your camera, camcorder or game con-
sole in at the side of the TV.
Press the
key on the remote con-
trol. The source list is displayed.
Press the ï key to select EXT3 and
press the Æ / key to confirm your
selection.
For mono equipment, connect to
VIDEO (2) and AUDIO L (3)
For stereo equipment, connect both
AUDIO L and AUDIO R (3)
To obtain S-VHS quality with an S-VHS
camcorder connect the S-VHS
cables with the S-VIDEO input (1) and
AUDIO L / R inputs (3)
Warning: Do not connect cables (1) and
(2) at the same time. Connecting both cables
(1) and (2) can cause picture distortion.
3
2
1
Side of TV
1.
2.
3.
•
•
•
Connect headphones
As shown in the figure below, insert the
headphones plug into the headphone
socket
at the side of the TV.
Press the
key on the remote con-
trol. The source list is displayed.
Press the ï key to select EXT3 and
press the Æ / key to confirm your
selection.
The headphone socket has a 3.5 mm jack.
The headphone impedance must be between
8 and 4000 Ohm.
TIP: Press the key on the remote
control to switch off the sound from loud-
speakers of the TV. To switch on the sound,
press the key again.
1.
2.
3.