Filter
Top Products
Contact your local DBS provider for more information about the
connections and theTV channels.
Connect to a set-top box
A cable box or satellite set-top box can be connected to theTV
through the following connections:
• ANT
• A/V (Composite Video and Audio)
S-Video
• YPbPr (Component Video Input)
• HDNI
For information about how to connect a set-top box, see the Quick
Start provided.
Connect a set-top box through RF IN/OUT
IftheTV is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3 or 4, or to the channel
specified by the service provider.
O
O Sll
L
Cable
Connect a set-top box through component video input or HDMI
F
_<_.,................
Connect the power cord
Warning
• Verify that your mains voltage corresponds with the voltage printed at the back of
the TV, Do not insert the power cord if the voltage is different,
2
Locate the power connector at the back of the TV.
The location of the power connector varies according to TV
model.
Insert the power cord fully into the TV power connector.
3 Connect the power cord plug to the power outlet. Ensure that
the cord istightly secured at both ends.
o -- o o
Disconnect the TV from the power
H Caution
" Pull the power- cord by the plug; do not pull on the power- cord,
1 Unplug the power cord from the power outlet.
2 Unplug the power cord from the power connector at the back of
the TV.
Manage cables
" A cable holder is available in selected models only.
Route your power cord, antenna cable and all other cables through the
cable holder at the back oftheTV.The holder helps keep your cables
tidy and easily manageable.
iiiiiiiiiii_i!!!!!!!!!!!!!!!!!!!!@i!
:::ii_!!!!!!!!!!!!!!!!!{iiiiiiill
_####################:_
EN 9