Filter
Top Products
5 Adjust your antenna to maximize the signal strength,
6 Press MENU/EXITto exit,
Uninstall and reinstall channels
When you uninstall a channel, you remove it from the list of stored
channels. Uninstalled channels are not reinstalled during an installation
update.
t Press MENU/EXIT on the remote control and select
[Installation] > [Channels] > [Uninstalt channels],
Installation
Channels Uninstall channels
2
3
4
5
Press I_to enter the list of stored channels.
Press A or T to select the channel you want to uninstall, and
press the green key on the remote control.
The channel is removed from the channel list. Press the green
key again to reinstall the channel.
Press MENU/EXIT to exit.
Return your settings to default values
When you return picture and sound settings to their default values the
channel installation settings are not affected.
t Press MENU/EXIT on the remote control and select
[Installation] > [Reset AV settings].
TV menu
Installation
ResetAVsettings
Show emergency alerts (EAS)
The SCTEI8 standard defines an emergency alert signaling method for
use by cableTV systems. EAS can be broadcast to digital devices such as
digital set-top boxes, digitalTVs, and digitalVCRs.
The EAS scheme allows a cable operator to disseminate information
related to state and local emergencies and warnings.
EAS contain the following information:
• Emergency alert text
• Start time and date
• End time and date
• Priority
EAS with priority maximum or high are always displayed on yourTV.
However, you can configure yourTV not to show EAS messages with
medium or low priority.
EAS is not possible with a multimedia browser or with analog video
SOUrCeS,
You can always remove the message from the screen.The message
display overlaps menus and other messages on the screen.
t Press MENU/EXIT on the remote control and select
[Installation] > [Preferences] > [Show emergency alerts],
Installation
Preferences
Show emergency alerts
2
3
4
Highlight an option:
• [Always]: Displays all emergency alert messages
• [Skip low priority]: Shows all messages except low priority
messages
• [Skip medium/low priority]: Shows maximum and high
priority messages only
Press _t to confirm your choice,
Press MENU/EXIT to exit.
2 Press I_to highlight [Start now], and press OK to resetthe
picture and sound settings.
3 Press MENU/EXIT to exit.
16 EN