Filter
Top Products
2 Set the sleeptimer
Select [Automatic] and press 4 to confirm your choice,
TV menu IInstallation
Clock Auto clock mode
Sleeptimer switches the TV to standby after a pre-defined period of time.
You can always switch off your TV earlier or reset the sleeptimer
during the countdown.
Press SLEEP repeatedly to select a value from 0 to 180 minutes. For
example, if you select 90, the TV switches to standby in 90 minutes.
" To turn the sEeeptimer off, select 0 minutes,
3 (Optional) Select the channel from which the TV reads the time.
• Press T and I_ to enter the menu for [Auto clock channel],
• Press _ or T to highlight a channel.
• Press 4 to confirm your choice.
4 (Optional) Select the time zone.
• Press T and I_ to enter the menu for [Time zone].
• Press A or T to highlight the time zone.
• Press 4 to confirm your choice.
5 (Optional) Set daylight saving.
• Press _' and _, to enter the menu for [Daylight saving].
• Press A or T to highlight [Automatic] or [Off].
• Press 4 to confirm your choice.
6 Press F1ENU/EXlTto exit.
Set the time manually
t Press MENU/EXIT on the remote control and select
[installation] > [Clock] > [Auto clock mode].
2 Select [Manual], and press _1to confirm your choice.
TV menu IInstallation
Clock
Auto clock mode
Auto clock mode
3 Press T to select [Time] and then press _ to set the time.
Use the format HH:MM. Select [AM]/[PM] for morning or
afternoon.
4 Press OK to confirm your choice.
5 Press T and I_ to enter the menu for [Day].
6 Press A or T to select the day.
7 Press OK to confirm your choice.
8 Press MENU/EXlTto exit.
Use child control and rating locks
You can prevent your children from watching certain programs or
certain channels by locking theTV controls and by using ratings.
Set or change your PIN
t Press P1ENU/EXlT on the remote control and select [Features]
> [Change PIN].
2 Enter a 4-digit PIN on the number buttons of the remote
control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN or if you have forgotten your PIN,
enter 07I 1.
• You are asked to enter your new 4-digit PIN again.
3 Enteryour PIN again to confirm.
L_ A message appears to confirm that your PIN has been
changed.
4
Press blENU/EXIT to exit.
Loci< the TV
This section describes how to loci< all channels on the TV. At the
specified time, screen is blanked out and the audio is muted.
t Ensure that the clock is set with the current time (see 'Set the
clock' on page 15).
2 Press MENU/EXIT on the remote control and select [Features]
> [Child lock] > [Lock after].
3 Enter your PIN.
4 Press _ to select [Timer].
Features IChild lock
Lock after
Timer
Timer
5 Press T to select [On] and activate the [Lock after] feature.
Select [Off] to deactivate the feature.
16 EN