Filter
Top Products
Connect your devices
This section describes how to connect a selection of devices with
different connectors, Different types of connectors can be used to
connect a device to yourTV, The following sections describe examples
only, other configurations are possible.
When you connect composite or component cables, match the cable
colors to the connectors on theTV,
Connect a DVD player/recorder via composite
connectors
OUT
"li _ RF IN
Do not place your recorder too close to the screen because some
recorders can be susceptible to sisnals,
iii!iiii!ii_{i_
TV
__ o_/odo R_OUT'_r"
=_ "11"BFIII
L÷ B÷VlDEO
If your recorder has an S-VHS video jack: For improved picture
quality, connect an S-Video cable with the S-Video input. Connect
the audio cables to the audio L and R input jacks of AV3/side AV.
• When you use an S Video connector, do not connect any device to the AV3/side
AV video jack,
If you use mono equipment, the left loudspeaker reproduces sound
but the right speaker does not. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal loudspeakers.
Connect a set-top box, DVD player/recorder and game
console via HDMI
75_
_r"
llo ;®®1 II
r® ® :;::01_
................9
Connect a DVD player/recorder via HDMI-DVI and
DIGITAL AUDIO OUT connectors
w Am_NN_
TV
AUDIO
IN
Connect a set-top box via a composite connector
2L
IV
Ifyour device has an S-VHS video jack, improve the picture quality as
follows:
• Connect an S-Video cable to the S-Video input of AV3/side AV
30 EN