Philips 40PFL7007 Flat Panel Television User Manual


 
2
Setting up
2.1
Tips on placement
Position the TV where light does not shine directly on the
screen.
Dim lighting conditions in the room for best Ambilight effect.
Position the TV up to 25 cm away from the wall for the best
Ambilight effect.
The ideal distance to watch TV from is three times its
diagonal screen size. When seated, your eyes should be level
with the centre of the screen.
For best sound, place the TV on a hard surface.
2.2
Power cable
Insert the power cable into the POWER socket of the TV.
Make sure the power cable is securely inserted into the TV.
Make sure that the power plug in the wall socket is accessible
at all times.
When disconnecting the power cable, always pull the plug,
never the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the
TV for a long period of time.
In Help, press L List and look up Standby for more
information on switching the TV on and off.
2.3
Antenna
Locate the antenna connection at the back of the TV. Insert
the antenna cable securely into the Antenna a socket.
You can connect your own antenna or connect to an antenna
signal from an antenna distribution system (common in certain
regions). Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.4
Satellite dish
Locate the F-type satellite connection at the back of the TV.
Attach the cable from your satellite dish to this connection.
2.5
Network
Wireless connection
What you need
To connect the TV wirelessly to the Internet, you need a
wireless router. Use a high-speed (broadband) connection to
the Internet.
Setting up / Network 5