Filter
Top Products
ENGLISH
_________________________
7.4 Set your preferences
This menu contains items that can set or adjust various special TV
functions and that will typically be accessed only occasionally.
_________________________
7.4.1 Select your location
This allows you to select the location of your TV.
If you choose for Retail shop it will result in fixed settings of picture,
sound and ambilight.
The location Home will give full flexibility to change any predefined
settings for picture, sound and ambilight.
_________________________
7.4.2 Select the volume bar
This allows you to select the display of the volume bar.
‡ Select Volume bar.
® Press the cursor right to select On or Off.
Select On to activate the temporarily display of the volume bar.
_________________________
7.4.3 Show emergency alerts (EAS)
This allows you to select the alert priority level of the information
disseminated by the cable operator.The standard SCTE18 defines an
Emergency Alert signalling method for use by cable TV systems to signal
emergencies to digital devices such as digital Cable boxes, digital TVs and
digital VCRs.
The Emergency alert signalling scheme defined in the standard allows a
cable operator to disseminate emergency alert information related to
state and local-level emergencies and warnings in a cost-effective and
efficient way, while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Low,Medium, High or Maximum.
The Emergency alert message with priority High or Maximum will always
be presented. Low or Medium will be present or ignored depending on
the selected setting.
) When the TV clock is undefined (See Chapter 7.6 Set your clock),
the Emergency Alert will be ignored.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
- The end time + date.
‡ Select Show emergency alerts in the Preferences menu.
® Press the cursor right and select one of the Emergency alerts
options:
- Always, when you always want the Emergency alert messages to
be displayed when available;
- Skip low priority, when you want the messages with low level to
be ignored;
- Skip low/medium priority, when you only want the messages
with high priority to be displayed.
ç - Emergency Alert Signalling is not possible:
- with multimedia browser;
- with analog video sources.
-You always have the possibility to remove the message from the
screen.
- The message display will overlap whatever menu element or other
message is on the screen.
_________________________
7.4.4 Downloaded rating table
This allows you to add region ratings lock options next to your current
ones.
) Before activating, please ensure regional ratings are broadcasted.
_________________________
7.5 Select your connections
This allows you to identify the type of accessory device you have
connected to each particular input and output.
‡ Select Connections.
® Press the cursor right to enter the list of types of external inputs.
ÒSelect the appropriate input with the cursor up/down.
> When you select
AV1, AV2, AV3, HDMI 1, HDMI 2, HDMI 3,
Side,
AUDIO IN L/R or DIGITAL AUDIO IN a list appears
allowing you to identify which type of accessory device is
attached to this input.
† Press the cursor right again to enter the list of types of devices
connected to the selected input.
º Select the accessory device with the cursor up/down.
Digital Audio In
If an accessory device has a digital audio output, you can connect this
with a single cable to the TV’s
DIGITAL AUDIO IN jack.
In the Connections menu, assign the
DIGITAL AUDIO IN to the
corresponding external input to which your accessory device is
connected.
In addition to accepting audio input via Digital Audio In, the TV can
output encoded Dolby Digital audio via the
DIGITAL AUDIO OUT
connector to an external amplifier or receiver.
19
Info
TV menu
Installation
Preferences
Location
Volume bar
Show emergency alerts
Downloaded rating table
Language
Channel installation
Preferences
Connections
Clock
Reset AV settings
Info
TV menu / Installation
Preferences
Downloaded rating table
Off
On
Location
Volume bar
Show emergency alerts
Downloaded rating table
Info
Menu TV
Installation
Connections
AV1
AV2
AV3
HDMI 1
HDMI 2
HDMI 3
Side
AUDIO IN L/R
DIGITAL AUDIO IN
Language
Channel installation
Preferences
Connections
Clock
Reset AV settings