Filter
Top Products
9
Connecting to your existing equipment
Unplug all equipment from the mains before making connections.
If your Television has RF Connection Only...
Refer to the illustration below:
1. Connect the satellite receiver’s ‘TO TV/VCR’ output jack to the TV’s UHF/VHF input jack.
2. Connect one end of the AC power cord to the satellite receiver’s AC IN jack. Connect the plug end to an AC
outlet.The power LED should light.
3. Connect other equipment to an AC outlet.
4. Switch on your TV first and select channel 3 on your TV.The Welcome screen should display.
5. Your satellite receiver is now ready for installation.To continue, refer to the installation section on page 17.
TV
TV
TV
Coaxial Cable
Digital Satellite Receiver (DSR)
6
6