Philips DVDR3510V DVD VCR Combo User Manual


 
English
15
Step 1: Basic Recorder Connections
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using the
recorder. If the antenna signal is
connected via Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.
If you want to connect to a Cable
Box/Satellite Receiver, see the
chapter “Step 2 : Optional Connections
– Connecting to a Cable Box or Satellite
Receiver” for the complete connections
to your TV.
A
Connect the existing Antenna/Satellite
Receiver/Cable TV signal (labelled as RF
OUT or TO TV) to the ANTENNA
socket on the recorder.
B
Connect the supplied RF coaxial cable
from the TV socket on the recorder
to the antenna input socket (or labelled
as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have connected
your TV channel (directly from an off-air
antenna or Cable box or VCR), you may have
to disconnect some of the cables before you
make the antenna connection.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
3139 241 26501
TO TV - I
/
O
EXT1
AUX - I
/
O
EXT2
S-VIDEO
(Y/C)
AUDIO
R
L
AUDIO / VIDEO OUT AUDIO OUT
COMPONENT
VIDEO OUT
VIDEO
(
CVBS
)
ANTENNA
TV
COAXIAL
DIGITAL AUDIO OUT
MAINS
P
R
P
B
Y
??
???
?
??
??
???
?
???
TV
A
B
Cable Satellite Antenna
DVDR3510V_eng_26244.indd 15DVDR3510V_eng_26244.indd 15 2007-08-01 1:46:16 PM2007-08-01 1:46:16 PM