Filter
Top Products
English
23
Step 3: Installation and Setup (continued)
Setting the date & time
This recorder has an automatic date and
time setting feature. If the recorder has
not set the time and date correctly,
further adjust the clock settings.
A
Press SETUP.
The system setup menu appears.
B
Use ST keys to select
{ Setup - Clock } and press X to
con rm.
Setup - Clock
01/01/06
00:01:08
Auto
Date (dd / mm / yy)
Time (hh : mm : ss)
Date - Time Setting
Date - Time Preset
Show DivX® Registration Code
P001/Ch003
OK
C
Select { Date-Time Setting } and press
X.
Use ST keys to highlight { Manual }
and press OK.
D
Select { Date (dd/mm/yy) } and press
OK to edit the date elds.
Use ST keys to change number and
use WX keys to select different entry
elds, then press OK to con rm.
Use the numeric keypad 0-9 on the
remote control to key in the numbers.
E
Press OK to con rm.
F
To set { Time (hh:mm:ss) }, repeat
steps
D
~
E
.
The basic installation is complete.
TIPS: Press X to access the options of an item in the menu.
Press SETUP to exit the menu.
DVDR3510V_eng_26244.indd 23DVDR3510V_eng_26244.indd 23 2007-08-01 1:46:17 PM2007-08-01 1:46:17 PM