Philips DVDR3510V DVD VCR Combo User Manual


 
English
65
Problem (Recording) Solution
Troubleshooting (continued)
The wrong TV channel
was decoded (recorded)
after you programmed a
recording using the
S
HOWVIEW® / VIDEO
Plus+® system.
Picture is fuzzy and
brightness varies when
copying DVD Video discs
or prerecorded video
tapes.
Recordings are not
occurring as scheduled.
New recordings cannot be
made.
A DVD±R/±RW recorded
on this DVD recorder
does not playback on a
DVD player.
The picture on my
decoder appears to be
distorted during
recording.
The VHS tape is ejected
when you press REC
button.
1) Press SHOWVIEW (or VIDEO Plus+) on the remote
control, enter the S
HOWVIEW® programming or
PlusCode number of the desired TV channel.
2) Press OK to con rm.
3) Check the channel number in the {Program #} input
 eld. If this does not correspond to the desired TV
channel, select this entry  eld and change the channel
number.
4) Press OK to con rm.
This happens if you try to copy DVDs or video tapes
that have been copy-protected. Even though the picture
on the TV is  ne, but the recording on the DVD
recordable disc is faulty. This interference is unavoidable
with copy-protected DVDs or video tapes.
The DVD recordable disc has a limited recording
lifetime, please change a new disc for recording.
The TV channel you want to record is not stored or
you have selected the wrong programme number.
Check TV channels stored.
If you adjust the clock after you have set a timer
recording, you have to reset the timer recording.
If the recorder cannot read the disc, you cannot record.
You cannot use the recorder to duplicate copyrighted
materials (DVDs or videotapes) onto a DVD±R/±RW.
A  nalised DVD±R has been inserted. Change disc.
– If a recording is too short, it is possible that a DVD
player cannot detect it.
You have to  nalise the DVD±R. See the chapter
“Playing your recordings (DVD±R) on other DVD
players” for details.
– If you are recording a programme from your decoder
box, view the same programme by pressing the SCART
on the recorder’s remote control.
If the safety tab has been removed, cover the tab hole
with clear tape.
Make sure the VHS tape is not at its end.
DVDR3510V_eng_26244.indd 65DVDR3510V_eng_26244.indd 65 2007-08-01 1:46:25 PM2007-08-01 1:46:25 PM