Filter
Top Products
1
Before you can use your new DVD Recorder, you must
complete the Initial Setup.
Press STANDBY © to turn on the Recorder. When you
turn on the Recorder for the first time, the first Initial Setup
menu (for Menu Language) will appear on the TV screen. "IS
TV ON? C03" will appear on the Recorder's display panel.
This reminds you to turn on theTV and set it to theVideo In
channel (Video In,Auxiliar etc.,depending on your hookup).
hitialSd_p
#e_uLanguage
E_gJlh
pess0Kt_0_ _ue
e
MON_OR mM RtTORN
SU_T_LE _ At_GLE Z0OM
ola
2
3
Use the ACH+, TCH-, and OK buttons on the remote
to select items during Initial Setup. Follow the on-
screen instructions.
You will choose languagesfor different features, choose aTV
Shape,and set upTV channels. This will take a couple of min-
utes,but you must do it before you can use the Recorder.
You cannot turn off the Recorder or use any of the buttons
on the Recorder until you finish the Initial Setup.The only
way to quit is to disconnect the power cord.The Initial Setup
will appear againthe next time you turn on the Recorder.The
menus will not go away until you finish the Initial Setup.
Press SYSTEM MENU to clear the screen when chan-
nels are set (when "Auto ch. search complete" appears).
Ins_llati0_
_[ItOOh P_gtamming
_[ItO e_ _rch r_mplete
024 CN_nels f_und
l0 _x[ press
SYS1EMNENU
0 0 • 0
1 2 3
5 8
7 8 9
CLE_n _UT_
PHILIPS I
When you finish the Initial Setup, GUIDE Plus+_";System
information will appear on the T_LPress OK to continue.
6
7
When "ldentifyingYour Location" appears, press
&CH+ or _CH- to highlight your country in yellow,
then press OK.
Next, press the Number buttons on the remote to
enter your postal zip code, then press OK.
The next message will ask whether you have Cable
TV service. Press &CH+ or _CH- to chooseYes or
No, then press OK. ChooseYes ifyou have a CableTV
subscription. Choose No if you have only a regular antenna
connected to the DVD Recorder.
If you chose No, go to step 14.
If you chose Yes, go to step 8.
The next message will ask if you connected a Cable
Box to the DVD Recorder. Press &CH+ or VCH- to
choose Yes or No, then press OK.
If you chose No, go to step 14.
If you chose Yes, go to step 9.