Filter
Top Products
Region codes
BecauseDVD films are usually not released at the sametime inall regions of the world, all DVD
players are keyed to a specific region code, Discs can be assignedan optional region code, If the
region codes of the player and disc do not coincide, playback is not possible,
This device will only play Region I DVDs or DVDs manufactured to be played inall regions ('ALL').
DVDs from other regions cannot be played in this DVD Recorder.
The number within the globe represents the region of the world.
Region I represents:
U.S, Canada, upper regions of North America, Bermuda, U.S. Virgin Islands and smaller regions near
Australia.
@
Technical data
Voltage : 110-130V/60Hz
Power consumption : 32W
Power consumption (Standby): Less than 7W (clock display off)
Measurements in inches (W/H/D): 17 2/3.0/13.30 (disc tray closed), 18.58 (disc tray open)
Weight without packaging approx.: 40kg
Power failure/no power supply: Channel and timer data will remain stored for approx. I year,
the clock data for approx. 12 hours.
Operating position: max. inclination of l0 degrees in any direction
Ambient temperature: 59 °F - 95 °F
Humidity: 25% - 75%
Accessories
Owner's manual
Warranty booklet
Quick-start guide
Remote control and batteries
Antenna cable
Power cable
Component video cable (cinch cable with red/blue/green plugs)
Video cable (with yellow plugs)
Audio cable (with red/white plugs)
IR Blaster
DVD+RW
6 Introduction