Filter
Top Products
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings
If you are only using the analog audio outputs (red and white OUT L AUDIO R, OUT
AUDIO LR jacks), select 'Of/' in the 'Digital output menu.
'Digital outpu_
You can select from the following settings for devices connected to the DIGITAL AUDIO
OUT jack:
'All' : Dolby Digital andDTS signalsaregoing out unchangedto the digital output, MPEG-2
multi-channel signalsare converted to PCM (PulseCode Modulation).
Use receivers/amplifiers with a digital multi-channel sound decoder
'PCM only' : Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation),
For receivers/amplifiers without a digital multi-channel sound decoder.
'Of/' : digital output is off
For devices with an analog audio input,
Sound
Bigital0utput
Analogoulput [Stereo ]
Nighlm0de
'Analog output'
You can select from the following settings for devices connected to the analog outputs ( OUT L
AUDIO R, OUT AUDIO LR ).
'Stereo' : For devices that use neither DolbySurround nor TruSurround. Only use this setting
when the DVD Recorder is connected to a stereo TV
'Surround' : Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible
two-channel output signal
For devices with a Dolby Surround / Pro Logic decoder.
'Night mode'
Night mode optimizes the sound dynamics at low volume. This causes less disturbance in quiet
environments. This setting only functions with Dolby Digital Audio on DVDs.
88 User preferences