Filter
Top Products
Before you call technical support
If you have any problems using this DVD Recorder, it may be caused by one of the following
reasons You can also call the customer service center in your country.
The telephone numbers can be found in the back of this owner's manual.
Have the model number (MODEL NO) and the production number (PROD.NO) ready.
The serial number (PROD. NO.) is printed on the type plate fixed at the rear of the set.
PROBLEM SOLUTION
The device does not react
to the touch of a button,
the remote control is
working:
•PDealer Mode' is on: All buttons at the front of the DVD Recorder are locked
To switch off this function:
1 Disconnect the DVD Recorder from the power outlet.
2 Press and hold down • and OPEN/CLOSE A and re-connect the Recorder to
the power supply.
3 As soon as the time or '--:--' appears in the display (6 - 10 seconds), release • and
OPEN/CLOSE A .
Resetting the DVD
Recorder to default factory
settings
,_/arning:
All the informationstored in the memory (programs, time, TIMER) will be reset (deleted)
1 Disconnect the DVD Recorder from the power outlet.
2 Press and hold down the STANDBY-ON _) button on the front of the Recorder
while reconnecting to the power outlet.
3 Release STANDBY-ON (_ when a 'scrolling text' appears in the display. All the
informationstored in the memory (programs, time, TIMER) will be reset (cleared).
Read paragraph 'Initial Installation' in 'Installing your DVD Recorder'.
No playback on DVD ._There is no recording on the disc: Change disc.
Recorder: _You inserted the wrong disc type: Your Recorder can play the following disc types: DVD
Video, (Super)Video-CD, DVD+R(W), Audio-CD , MP3-CDs
•_{ou inserted the disc the wrong way: Insert the disc with the label facing up.
•_The disc is dirty. Clean the disc.
¢_!rong region code: The region code of the DVD and the DVD Recorder must match.
•_The child lock is on. Read chapter 'Access Control (Child Lock)'
•_{ou have selected or set the wrong channel number on the TV for the DVD Recorder: Select
the correct channel number on the TV (channel 3 or 4).
•_The cable connecting the TV and the DVD Recorder may be loose. Check the cable.
Before you call technical support 97