Filter
Top Products
REMOTE CONTROL NTSC/ANALOG FEATURES
+
+
mute
volume
channel
power
DTV
Analog
DTV1/3
sleep
alt audio
status
ext input
freeze
analog format
DTV
Analog
DTV2/3
A/CH
ok
exit
menu
DTV
Analog
DTV3/3
ANALOG TV MODE
29
scroll arrows
Press to move to the next (or previous) page of remote
controls. The touchscreen will display the current
control screen’s page number, and the total number of
pages available for the selected device (1/3; 2/3; etc.)
SMART HELP
menu buttons
Press the Menu (or ok) button to
show on-screen controls. Press M
▲ or ▼ buttons to move up (or
down), the M
ᮤ or ᮣ to move
left (or right) through the list of
controls.
volume buttons
Press to adjust the DPTV sound level up (+) and down (-).
channel scan buttons
Press to scan up (+) or down (-) through any NTSC programmed
channel numbers.
power button
Press to turn the DPTV ON and OFF.
sleep button
Press to set the DPTV to
automatically turn itself OFF.
(15 minutes to 2 hours ahead.)
number buttons
Press the number buttons to select DPTV channels. Press
two number buttons to select single digit “major” channel
numbers. For example: press "0" then "6" for channel 6.
exit button
Press to clear the DPTV screen after control
adjustments. Also press to see the current channel
number on the DPTV screen.
A/CH button
Press Alternate Channel (A/CH) to select previously
viewed channels. Enter the desired two channel numbers
(from the remote’s number buttons), and then press
A/CH to toggle back and forth between the two channel
selections.
ext input button
Press to quickly select NTSC auxiliary input modes
(AUX1/2/3), as well as cycle through the DPTV’s other
input option modes (Monitor VGA, EXT HD, etc.).
mute button
Press to turn the sound OFF on the DPTV. Press again to return
the sound to its previous level.
status button
Press to see the current channel number on the DPTV screen.
Also press to clear the DPTV screen after control adjustments.
T
he Remote Control contains
three display screens of
“Analog TV” related controls. Use
the touchscreen controls to access
and adjust NTSC features for Input
selection and Menu feature
adjustments.
Note: For battery installation and
other details on the initial use of
the remote control also refer to the
HD6400W Quick Use guide
included with your DPTV.
Gently tap the remote
touchscreen with your finger to
display its control panel for use.
Be sure “DTV” is selected for the
current device tab item category.
Press the “Analog” command
button (on the lower left of
remote case) to ensure NTSC
mode commands are sent from the
remote.
1
2
STOP
BEGIN
Due to the amount of
optional component and
feature uses available with the
remote’s Device Reference and
Learn Code lists, please also refer
to the separate full-use Remote
Control Owner’s Manual for
complete details on its function
and operations.
alternate audio
Primarily used for “alt audio” ATSC mode
feature, this button can also be used to
quickly select the NTSC Second Audio
Program (SAP) feature (when available).
analog format button
Press to select one of the TV screen display format modes
(i.e. Panoramic, 4:3, 16:9, etc.).
Analog
Command
Button