Filter
Top Products
ATSC/DIGITAL PICTURE MENU CONTROLS
ATSC
+
+
mute
volume
channel
ok
exit
menu
DTV
Analog
DTV3/3
1
4
1
2
DTV Main Menu
Picture
Sound
Speakers
Features
Tuning Program
DTV Setup
Exit
Picture Menu
Color
Brightness
Sharpness
Picture
Tint
Convergence
Back
PRESS to ALIGN RED
Press MENU to Return
3
2
CONVERGENCE MENU
ALIGN RED
ALIGN BLUE
CONVERGE MULTI POINT
BACK
RED/BLUE CONVERGENCE
SMART HELP
37
DTV Main Menu
Picture
Sound
Speakers
Features
DTV Setup
Exit
C
onvergence is the correct
lining up of the red and blue
light paths on the DPTV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary.
Select the ATSC Convergence
control.
With Picture Menu on-screen,
move the highlight with the
MENU ▲▼ buttons. Then press
the MENU (or ok) button.
Press the MENU ▲▼ buttons
to select either the Align Red or
Align Blue Convergence control,
press the MENU button to
continue.
Press the MENU buttons
to move the selected red (or blue)
convergence cross directly over the
white cross on the DPTV screen.
The red (or blue) cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
Press the “exit” button to clear
the screen when convergence
adjustments are complete.
1
2
3
STOP
BEGIN
4
Remember, Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
NOTE: Adjustments for “Multi-Point” on-
screen color fringing can also be made as part
of the DPTV’s Convergence control system.
Follow the on screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These multi-point
settings can then be “Saved” to memory for
the specific areas of the DPTV screen (or
Factory Settings for convergence can be
recalled and put back into place for use).
CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK
CONVERGE RED POINTS
USE TO ADJUST
DIGIT 2, 4, 6, 8 TO MOVE CURSOR
MENU TO RETURN
PRESS MENU NOW TO CONTINUE
MULTI-POINT CONVERGENCE CONTROLS