Philips HD6400W Projection Television User Manual


 
REMOTE CONTROL ATSC DIGITAL FEATURES
+
+
mute
volume
channel
power
DTV
Analog
DTV1/3
sleep
alt audio
status
ext input
freeze
analog format
DTV
Analog
DTV2/3
A/CH
ok
exit
menu
DTV
Analog
DTV3/3
DIGITAL TV MODE
52
scroll arrows
Press to move to the next (or previous) page of remote
controls. The touchscreen will display the current
control screen’s page number, and the total number of
pages available for the selected device (1/3; 2/3; etc.)
SMART HELP
menu buttons
Press the Menu (or ok) button to
show on-screen controls. Press M
or buttons to move up (or
down) the list of DTV controls.
Press the (M)
or buttons to
make adjustments to the selected
controls.
volume buttons
Press to adjust the DPTV sound level up (+) and down (-).
channel scan buttons
Press to scan up (+) or down (-) through any ATSC programmed
channel numbers.
power button
Press to turn the DPTV ON and OFF.
sleep button
Press to set the DPTV to
automatically turn itself OFF.
(15 minutes to 2 hours ahead.)
number buttons
Press two number buttons to select single digit “major”
DTV channels. Use a four-digit channel entry to select
ATSC system “sub-channel” programs, for example: press
“0, 6, 0, 1” for sub-channel 6.01. (See page 5 in the
HD6400W Quick Use guide for details on the use and
selection of sub-channels.)
exit button
Press to clear the DPTV screen after control
adjustments. Also press to see the current channel
number on the DPTV screen.
A/CH button
Press Alternate Channel (A/CH) to select previously
viewed channels. Enter the desired two channel numbers
(from the remote’s number buttons), and then press
A/CH to toggle back and forth between the two channel
selections.
mute button
Press to turn the sound OFF on the DPTV. Press again to return
the sound to its previous level.
dtv freeze
Press to freeze or stop the current picture on the DPTV screen.
Program sound will continue to play. Repress the freeze button, or
wait for a 60-second time out, to return to live program action.
T
he Remote Control contains
touchscreen displays for
“DTV” related controls. Use the
remote’s touchscreen buttons to
access and adjust the DPTV for
dedicated ATSC mode features, as
well as perform on-screen Menu
adjustments and select other
program functions.
Note: For battery installation and
other details on the initial use of
the remote control also refer to the
HD6400W Quick Use guide
included with your DPTV.
Gently tap the remote
touchscreen with your finger to
display its control panel for use.
Be sure “TV” is selected for the
current device tab item category.
Press the “DTV” button on
the remote to ensure ATSC mode
commands are sent from the
remote.
1
2
STOP
BEGIN
Due to the amount of
optional component and
feature uses available with the
remote’s Device Reference and
Learn Code lists, please also refer
to the separate full-use Remote
Control Owner’s Manual for
complete details on its function
and operations.
alternate audio*
Press to cycle through the available audio
language tracks for the current DTV program.
(See the additional alternate audio section
information shown below.)
status button
Press to see the current channel number on the DPTV screen.
Also press to clear the DPTV screen after control adjustments.
* The “alt(ernate) audio” button on the
remote allows the user to select a language
preference for multilingual or alternate language
audio track programs that may be received for DTV
viewing. (English is the default language setting.)
When digital broadcast material is received which
contains multiple language soundtracks the DPTV
will identify, find, and then select the preferred
alternate audio language for sound playback. If the
selected language preference is not available within
the received program material, the default audio
language is then selected.
Alternate Audio preference: English
ext input button
Press to select the auxiliary input connections available on
the rear of the DPTV (analog NTSC - AUX1/2/3; Monitor
-VGA; External High Definition - EXT HD, etc.).