Filter
Top Products
11
F
or reasons such as poor cable reception,
the picture can sometimes appear slightly
“speckled” (or has signal noise shown in the
picture). The DNR (Dynamic Noise Reduction)
control can help eliminate this type of interfer-
ence and improve the quality of the picture.
1
Press the MENU button on the remote
to display the on-screen menu.
2
Press the CURSOR UP or CURSOR
DOWN button until the word PIC-
TURE is highlighted.
3
Press the CURSOR RIGHT button
to display the PICTURE menu fea-
tures.
4
Press the CURSOR UP
or CURSOR
DOWN button
to scroll the Picture
menu features until the word DNR is
highlighted.
5
Press the CURSOR RIGHT button
turn the DNR feature ON or OFF.
6
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
HOW TO USE THE DNR (DIGITAL NOISE REDUCTION) CONTROL
VOL
1
6
3,5
2,4
2,4
“Noise” Reduction is a video adjustment fea-
ture that affects the picture quality of the TV
not the sound.
NOTE: If the Sharpness control setting is
under 50 (see Picture Adjustments on the
previous page), the DNR control will have
little or no effect to the TV’s picture when
switched to ON.
HELPFUL
HINT