Filter
Top Products
10
2.3 Controls and Connectors
Controls and Connectors
<Main Power Switch Section>
1 STANDBY/ON indicator
Red when the display is in standby mode; turns green
when the display is operational.
2 STANDBY/ON button
Turns main power on or off.
3 KEY LOCK/UNLOCK switch (hidden)
Renders the operation panel and remote operative or
inoperative.
4 INPUT button
Used to select inputs.
5 MENU button
Used to display the menu screen.
6 ADJUST (
5∞32) buttons
Used to move the cursor on the menu screen or to
increase/decrease adjustment values.
7 SET (select) button
Used to select an adjustment item on the menu screen
or to change settings.
8 SIZE button
Used to manually change screen size.
9 DISPLAY button
Used to view input and settings conditions.
<Terminal Section>
0 SPEAKER
Output terminal for a right-hand external speaker.
Connected to speakers of 8 to 16 Ω impedance.
- AUDIO OUTPUT (Stereo mini jack)
Used to output the sound from a device connected to the
display to a device such as an AV amplifier.
= Combination Input and Output Terminals
Used for simultaneous control of various units.
(Refer to 5.6 “Combination Connection”.)
Please use a Mini DIN 6-pin cable (straight, all pins wire
bound; this is readily available on the market) as the
connector cable.
(NOTE) No ABL linkage function is provided.
These terminals are incompatible with multi-
projections such as the RM-V4000V.
When the main power is off, there is no output.
RS-232C
75Ω 2.2kΩ
SPEAKER
8Ω ~16Ω
COMBINATION CONTROLAUDIO OUTPUT
IN OUT IN OUT
INPUT 3/4 INPUT 1/2
RL ANALOG
R G B
INPUT 4AUDIO INPUT
OUTPUT
ANALOG
R G B
MAIN POWER AC INLET
R
HDRBGVD
Y
INPUT 2INPUT 3ON SYNC
OUTPUT
INPUT 1
VIDEOS-VIDEO
YC
OFF ON
CR/PRCB/PB
INPUT 1H/V SYNC
SPEAKER
8Ω ~16Ω
L
STANDBY/ON
INPUT
MENU
ADJUST
SET
SIZE
DISPLAY
2
4
3
5
6
7
8
9
1
0
- @! $ %= ~ #
_^ + ¡ ™ £ ¢)(*&
<Operation Panel>
<Connectors>
(at the rear of the
main unit)
NOTE
When the optional plasma display speakers are attached, it is
not possible to use the operation panel on the display.