Filter
Top Products
112
Integrator Mode
2) Adjusting the WHITE BALANCE
The items that can be adjusted here are R HIGH, G HIGH, B HIGH, R LOW, G LOW and B LOW.
1 Before entering the integrator mode, switch the unit to the
specific input (one of INPUTs 1 to 4) in which adjustments
will be made (refer to section 5.4.1, “About the integrator
mode”).
The ID number of the set of items will be indicated in the
upper right corner of the screen, where “– –” is displayed
in the illustration.
Select WHITE BALANCE.
2 Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the WHITE
BALANCE adjustment values to their factory preset values.
Push the 2 button on the remote control or the operating
panel on the main unit to return to screen 1.
3 Make the necessary adjustments.
Make the adjustments using the 2 and 3 buttons on the
remote control or the operating panel of the main unit.
Press the SET button to return to screen 2.
<Adjustable range> 0 to 255 for every item
WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
G HIGH
:
128
B HIGH
:
128
R LOW
:
128
G LOW
:
128
B LOW : 128
DEFAULT
3R HIGH
:
128
ALL DEFAULT
– –
WHITE BAL.
WHITE BALANCE
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
BRIGHT
:
128
COLOR
:
132
TINT
:
132
SHARP
:
128
DETAIL : 128
RESET
128
3CONTRAST
:
128
MENU : MENU OFF
R HIGH
DEFAULT
– –
3WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
G HIGH
:
128
B HIGH
:
128
R LOW
:
128
G LOW
:
128
B LOW : 128
DEFAULT
R HIGH
:
128
ALL DEFAULT
– –
Screen 1
Screen 2
Screen 3
]
]
]