Filter
Top Products
57
Example .... Securing to a foundation
ceiling with shackle and
safety wire.
Ceiling flange COMP
Anchor
Foundation ceiling
Shackle
Safety wire
Bolt
(NOTE) Safety wires serve as important backups in keeping the unit securely mounted.
Plasma Display Ceiling Suspension Hardware (one-side type): PDK-5002
4.5.3 Assembling and Installing the mounting hardware and mounting the plasma display
1) Preparations
You will need the following tools. Make sure you have them at hand before beginning work.
• Wrench or spanner (subtense 12 mm)
• Hexagonal wrench (subtense 4 mm, for M5 bolts)
• Hexagonal wrench (subtense 5 mm, for M6 bolts)
• Hexagonal wrench (subtense 6 mm, for M8 bolts)
• Hexagonal wrench (subtense 8 mm, for M10 bolts)
You'll also need tools for ceiling work.
2) Assembling and installing the mounting software
1 Confirm that the monitor brackets (left and right) are firmly mounted to the monitor frame. Insert the center rod
through the monitor frame, and the spacer into the post COMP. Secure the post COMP and the center rod with two
hexagonal socket head bolts (M8 × 75).
2 Tighten the vibration-preventing hexagonal socket head bolt.
3 Select the installation site, then apply the supplied pattern to the ceiling, drill the suitable holes, and mount the ceiling
flange COMP. The appropriate types of screws and other display/mounting hardware will depend on the strength
and composition of the particular ceiling.
4 Insert the post COMP into the ceiling flange COMP and secure the two with two hexagonal socket head bolts (M10
× 85).
5 Tighten the vibration-preventing hexagonal socket head bolt (M6 × 10).
• Firmly tight all bolts.
• After mounting the mounting hardware but before mounting the plasma display, confirm the strength of the
mount portion of the ceiling.
• For additional safety, use the holes in the ceiling COMP flange, as shown.
[Use parts strong enough to support the weight of the display.]