Note
You can also perform the same operations using
SEARCH. To display SEARCH, touch A.MENU
and then touch FUNCTION.
Specifying track
You can use the direct search function to play
a disc without using a menu (without PBC
playback).
! Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to DVD.
(Refer to page 18.)
! During PBC playback of Video CDs, this
function cannot be operated.
% Press 010 corresponding to a desired
track number when the disc is stopped.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in order.
! To select 23, press 10, 10 and 3 in order.
Note
With some discs, the icon
may be displayed
and operation may not be possible.
Selecting audio output
You can switch between stereo and monaural
audio output.
% Press AUDIO during playback.
Press AUDIO repeatedly to switch between
the following outputs:
L+R (left and right channels)L (left channel)
R (right channel)
Note
You can also perform the same operations using
L/R SELECT. To display L/R SELECT, touch
A.MENU and FUNCTION and then touch
NEXT.
Playing Video CDs
En
48
Section
08