Pioneer AVH-P7500DVD DVD Recorder User Manual


 
Scanning CDs and tracks
While you are using DISC REPEAT, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
MULTI-CD REPEAT, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch A.MENU and FUNCTION and then
touch SCAN.
3 Touch a to turn scan play on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4 When you find the desired track (or
disc) touch b to turn scan play off.
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1 Touch A.MENU and FUNCTION and then
touch PAUSE.
2 Touch a to turn pause on.
Play of the current track pauses.
# To turn pause off, touch b.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Touch a or b to select a CD.
2 Touch A.MENU and FUNCTION and then
touch NEXT.
3 Touch ITS MEMORY.
4 Touch c or d to select a desired track.
5 Touch a to store the currently playing
track in the playlist.
ITS MEMORY is displayed briefly and the cur-
rently playing selection is added to your play-
list. The display then shows track number
again.
6 Touch ESC to return to the playback dis-
play.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Multi-CD Player
En
62
Section
12