Filter
Top Products
15
En
02
• The “PQLS 2ch Audio” function is only activated when
a Pioneer AV receiver or amplifier compatible with the
“PQLS 2ch Audio” function is connected directly to
the player’s HDMI OUT terminal using an HDMI
cable, and when the player is set as follows (page 38):
KURO LINK: On
PQLS: Auto
• The “PQLS Multi Surround” function is only activated
when a Pioneer AV receiver or amplifier compatible
with the “PQLS Multi Surround” function is
connected directly to the player’s HDMI OUT
terminal using an HDMI cable, and when the p layer is
set as follows (page 38):
HDMI Audio Out: PCM
KURO LINK: On
PQLS: Auto
•Also refer to the operating instructions of AV receiver
or ampli
fi
er.
• Please see the Pioneer website for AV receivers or
amplifiers that support the PQLS function.
Caution
•If the output video resolution is switched, the PQLS
function may not work. The function will work again
once playback has been stopped then restarted.
Note
•The PQLS indicator on the player’s front panel lights
when the PQLS function is activated (page 12).
About connections to components
of other makes supporting the KURO
LINK function
The functions listed below work when a TV or AV system
(AV receiver or amplifier, etc.) supporting the player’s
KURO LINK function is connected to the player using an
HDMI cable. (Depending on your TV or AV system (AV
receiver or amplifier, etc.), it could happen that not all of
the functions will work.)
• Functions operated from the TV
• Auto-select function
• Simultaneous power function
• Unified language function
Please see the Pioneer website for the latest information
on brands and model numbers of other brands that
support the KURO LINK function.
Connecting a TV
See Connecting an AV receiver or amplifier below to
connect an AV receiver or amplifier using an HDMI cable.
Caution
•Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions of
AV receiver or amplifier.
Caution
•Hold the plug when connecting and disconnecting
the cable.
•Placing a load on the plug could result in faulty
contact and no video signals being output.
LAN (100)
HDMI OUT
OUTPUT
COMPONENT VIDEO
DIGITAL
OUT
OPTICAL
CONTROL
IN
Y
R
AUDIO
VIDEO
L
P
B
P
R
RS-232 C
USB
(BD STORAGE)
Player’s rear panel
TV
Match the direction of
the plug to the terminal
and insert straight.
To HDMI
input terminal
HDMI cable
(commercially
available)
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable (below).
Direction of signal flow
LAN (100)
HDMI OUT
OUTPUT
COMPONENT VIDEO
DIGITAL
OUT
OPTICAL
CONTROL
IN
Y
R
AUDIO
VIDEO
L
P
B
P
R
RS-232 C
USB
(BD STORAGE)
Player’s rear panel
To HDMI
input terminal
From HDMI
output
terminal
AV receiver
or amplifier
To HDMI input
terminal
TV
HDMI cable
(commercially
available)
Match the direction
of the plug to the
terminal and insert
straight.
Direction of signal flow
HDMI cable
(commercially
available)
LX52_VXJ5_IBD_EN.book 15 ページ ２００９年３月３日 火曜日 午後７時２９分